Medical Cotton Making Machine

basically we are very proved to say we have engough 

the fiber which is used for dressing injory is different property when compare to the e the fiber which is used over the skin.

absorbent cotton three type of cotton to be mixed textile blowroom carding waste,comber noils and bengal desi cotton. In these three cotton stable length and mic and trash is getting varied / the stable length from 11 mm to 22mm mic from 3. 8 to 5. 5 and trash from 3,2 to 5 % . During selection of fiber we have conceratiom of market price, end use and application is very much importent.

we are manufacture the two king of machine one is manual feed another one is automatic feed. In automatic feeding circular and high spped condenser is addtion remaing all the machine are comman. At any time can be add the two machine.

the three type of raw cotton mix by placing into the round bale plucker. It helps to reduce the trough size. And passes to  the mixing bale opener and six beater machine through high speed condenser and fiber opening machine. These all machine helps to remove the trash and unwated impurites and removes more short fiber and now the fiber is very much capable for bleaching process.

in bleaching process two thing are taken care namely dencity and wax to be removed to increased the absorbency from 8. 33 to 22%. This called bleaching process.

the cleaned fiber in pre cotton plant is treated in the fiber pressing machine. The fiber is mixed with hot water and wetting agent and deliver round cake form based on kier vesseal capacity. The cotton cake is feed in the  high presser kier for bleaching process for about 4 hours. After the bleaching process the water is removed by the hydro extractor and tough bleached fiber is treated in wet cotton opener. The dry fiber is pass through dryer and balled in bale press.

the bleached bale is finially coming to the finial  end process called roll making plant. In this process only deside the cotton roll jig zack cotton, ear buds,cotton ball  and santory napkin machine. The capacity of the blowroom is 400 kgs per hour so carding machine can be extended as whenever require as based on end product and production requirement. The bleached bale is placed in round bale plucker based on the carding surgical cotton roll out put, the whole process is sencronised,by sensor and pressure switch. Totally avoid the manuale operation. Only collection of the cotton web from the carding drum rolling and cutting is manual. The collected the cotton from round bale plucker is stored in the material feeding machine to ready to supply to the carding machine via chute . The  pressure sensor fitted in the rectangular duct always allot how much grams of cotton need based on the mfm ready to deliver the cotton. The plc controled carding machine deside the cotton roll specification(50 gms to 500gms). In the same plant if we add the aditional carding machine ear buds and cotton ball can be made with additional machine. Since the surgical cotton is the raw material for santory napking mechanian. The etp and crane involves maintainance so we requesting customer take responsibility

SCOPE OF  AMARNAATHH  ENGINNERING INCLUSIVE  ITEMS

1.       TRAIL RUN OF ALL THE MACHINE IN COIMBATORE WITH BLEACHED COTTON MATERIAL (RAW MATERIAL SUPPLY IS IN YOUR SCOPE )

2.       ALL THE MACHINES IN EX WORKS PACKED CONDITION AND STUFF IN THE LORRY.

3.       ERECTION OF ALL MACHINE AND TRAINING TO BE GIVEN BY OUR ENGINNER  TO YOUR TECHANICIAN AND LABOURS DURING INSTALATION.

4.       SUITABLE LABOURS AND TECHANICIAN TO BE PROVIDED BY YOU

5.       ONE YEAR WARREENTY FOR OUR MANUFACTURING DEFECT WILL BE IN OUR ACCOUNT.

6.       ONE MONTH TRAING FOR YOU TEACHANICIAN AFTER COMPLIECTION OF ERECTION,

7.         4 TIME ENGINNER VISIT FOR RESETTING OF MACHINES

8.        SPECIAL TOOL WILL BE PROVIDED BY YOU.

SCOPE OF CUSTOMER  OF AMARNAATHH EXCLUSION.

1.       TRANSPORT FROM  M/S AMARNAATHH ENGINNERIN TO BE TAKEN CARE YOU,

2.       TRANSIT AND ERECTION ENSUREANCE TO BE BY CUSTOMER SCOPE.

3.       SAFE UNLOADING AND SHIFTINGTHE MACHINE TO ERECTION SPOT IN YOUR RESPOSIBILTY.

4.       SKILLED AND UNSKILED LABOUR TO BE PROVIDED BY YOU.

5.       ELECTRICAL MAIN INLET CONNECTION FROM TRANSFORMER TO INDIVIDUAL MACHINES IS CUSTOMER RESPOCIBILITY AS PER YOUR STATE GOVERNMENT NORMS.

6.        FOR ENGINNERS DECENT BOARDING AND LODEGING TO BE PROVIDED BY YOU.

7.       LOCAL TRANSPOTATION FOR OUR ENGINNERS FROM HOTEL TO MILL AND BACK WILL BE PROVIDED BY YOU.

8.       SPECIAL LUBRICATION BASIC TOOL AND CLEANING MATERIAL TO BE SUPPLIED BY YOU.

9.       ANY MISHANDLING OF MACHINE AND MEACHANICAL DAMAGES OF BEATERS AND  CARDING WIRE DAMAGES TO BE IN YOUR ACCOUNT.

1

Surgical cotton roll